Introduction
Congratulations and thank you for purchasing the Talent MIX-R portable USB
mixer. It is ideally suited for a small home studio or the on-the-go recording
enthusiast. At approximately 4" long and 5" wide (98 x 143 mm), the MIX-R
respects your desk space, while providing a phantom-powered XLR & 1/4"
combination socket, stereo USB/Line channel plus a dedicated 2-Track input.
Main Features
1. Ultra-compact and ultra-low noise analog mixer with USB/Audio interface
2. Powered through USB or external adaptor
3. Built-in stereo USB/Audio interface to connect directly to your computer
4. Free audio recording and editing
5. State-of-the-art mic preamp comparable to stand-alone boutique preamps.
6. 2-band graphic EQ for warm and musical sound.
7. 2-Track input assignable to Headphone or Main Mix output .
8. Main Mix plus separate Phones output.
9. High-quality components and exceptionally rugged construction ensure
long life.
Unpacking
Every MIX-R has been thoroughly tested and has been shipped in operating
condition. Carefully check the shipping carton for damage that may have
occurred during shipping. If the carton appears to be damaged carefully inspect
your units for any damage and be sure all accessories necessary to operate the
system have arrived intact. In the event damage has been found or parts are
missing, please contact your place of purchase for further instructions.
2
3
IMPoRTANT SAFeTY INSTRUCTIoNS
Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. The unit should
be connected to an earth grounded AC electrical socket. Do not defeat the safety purpose of the polarized or
grounding plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet. Refer servicing to qualified personnel. To reduce the risk of fire and shock do not expose unit
to rain or moisture. Clean only with dry cloth. Unplug the unit during lightning storms or when unused for long
periods of time.
The unit should be operated in a well ventilated area. Minimum clearance is 2 inches from the ventilation
openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at
the plugs, convenience receptacles, and at the point where they exit the unit. Only use attachments/accessories
specified by the manufacturer.
Note:
Unit is set at the factory for 115V operation. Unit may not be adjusted or modified for 230V operation.
SPeCIFICATIoNS
