TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
biuro@talex-sj.pl
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
16
of
56
5. Description of the machine
Fig.2 General view of the front disc mower
The disc mower consists of three main components. The first component is the
mower's
suspension system (1)
, made of welded steel parts to form a rigid and robust structure. The
second component is the
load-bearing frame (2)
, made of welded steel parts, which is
connected with the suspension system by an articulated coupling. The third component is the
cutting unit (3)
made of bolted and welded steel parts to form a rigid structure. The cutter bar
and gears are fitted with safety guards. The machine is equipped with adjustable swathing discs
for swath formation during work.
The machine's service settings are controlled from the operator's cab via the power hydraulics.
This allows a very precise positioning of the machine during operation.
Use certified slings or chains according to the weight of the machine. Pay special
attention to the secure attachment of the slings to the machine and to the
transport vehicle. When transporting or loading with hoisting equipment, it is
important to remember about the transport protective measures. Make sure
that you lower the parking stand and secure it with a cotter pin.
