TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
biuro@talex-sj.pl
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
17
of
56
5.1. Equipment and accessories
5.1.1. Basic equipment
Basic equipment of the mower consists of:
•
Articulated telescopic shaft with a uni-directional clutch, with a friction clutch
•
Parking stand
•
Set of spare blades
•
Blade tool for securing the discs during blade replacement/inspection
•
Instruction Manual
•
Warranty Card
The cutter is not supplied with a portable warning light or a triangular slow vehicle
warning sign.
These elements can be purchased separately from the
manufacturer or in a farming equipment depot. Each user of the machine should
have a fully functional triangular slow vehicle warning sign. Failure to install
these elements during transport may result in an accident. The machine user is responsible for
the damage resulting from the accident.
Attention:
ALL PARTS OF THE MACHINE ARE AVAILABLE FROM THE MANUFACTURER AGAINST AN
ADDITIONAL PAYMENT.
5.2. Technical specification
Table No. 1
TECHNICAL DATA
No.
Details
Unit
Parameter
1.
Machine type
-
Fast Cut 300
2.
Mount type
Triangle hitch
3.
Mowing width
[mm]
3000
4.
Power requirement, min.
[KM]
80
5.
Number of discs
[pcs.]
7
6.
Number of blades
[pcs.]
14
7.
Tractor hitch category
II
8.
Disc rotational speed
[rpm]
3000
9.
Rotational speed of tractor’s PTO
[rpm]
1000
10.
PTO shafts
-
880 Nm
with friction clutch
620 Nm with one-way clutch
11.
Performance
[ha/h]
3.0
12.
Working speed
[km/h]
~10 - adapt to conditions
13.
Transport speed
[km/h]
15
14.
System rated pressure
MPa
16
