TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
biuro@talex-sj.pl
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
31
of
56
Any worn out or damaged parts must be obligatorily replaced with new
ones
Operating the mower with damaged parts of the service disc like holders or
blades, is not allowed
Inspect the blades every time before you start work and after
each instance of hitting an obstacle, e.g. stone, wood or metal. It
is mandatory to wear protective gloves.
Fig.22 Blade arrangement depending on disk rotation (top view)
Table 2
MAX ALLOWABLE
BLADE PLAY
Play
rated
[mm]
allowable
[mm]
Transverse
axial
0.2
3.0
Longitudin
al axial
0.1
0.4
The cutting blades must be replaced in compliance with the specific safety rules.
1.
Use only the original and functional parts for the cutting unit
2.
The replacement must each time cover the full set of tools on a disc. Ensure uniform
distribution of the rotating weight and uniform wear of the blades.
3.
Check the condition of the interlinked components, that is, a holder, shank and a blade.
Replace them with new ones if any damage occurs, see Fig.20.
4.
When tightening bolted joints observe the values in Table 3, to ensure appropriate
tightening torque of bolts and nuts.
