TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
biuro@talex-sj.pl
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
4
of
56
Copying and processing of the Manual and its parts without the manufacturer's consent is
prohibited. TALEX
guarantees efficient operation of the machine when used in accordance with
the technical and operating conditions described in the INSTRUCTION MANUAL.
All faults revealed during the warranty period will be repaired by the In-Warranty Repairs
Service.
Expiration date of the warranty period is specified in the WARRANTY CARD.
Machine parts and components which are subject to wear in normal operating conditions are
not covered by the warranty, regardless of the warranty period.
In-Warranty services are provided only in such cases as mechanical damage not resulting from
user's fault, manufacturing defects of parts, etc.
This group includes, among others, the following parts/components:
•
cutting blades
•
protective skirts
•
bearings
If any damage results from:
•
mechanical damage caused by the user's fault or road accident,
improper use, adjustment or maintenance, or the use of the machine contrary to its
intended purpose,
•
operating a damaged machine,
•
repairs conducted by unauthorised persons or improper repairs,
•
unauthorised changes to the machine structure,
the user may invalidate its rights to the In-Warranty Services.
The user must report all defects in paint coatings or signs of corrosion noticed without any
delay and have the defects removed regardless of whether the damage is covered by the
warranty or not. Special warranty terms and conditions are laid out in the WARRANTY CARD
attached to the newly purchased machine.
NOTE!
Request the dealer to properly fill in the WARRANTY CARD and Complaint forms. If,
for instance, the sale date or a dealer stamp is missing, your complaint is at risk of not
being considered valid.
