The Instruction Manual
LEO 320 PROFESSIONAL shredder
Page
21
of
37
TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail:
biuro@talex-sj.pl
www.talex-sj.pl
The shredding tools must be replaced after discovering defects, noticeable signs
of wear, blunting of the cutting edges, missing blades or hammers, or excessive
play of the mounted tools.
Table No. 2
MAXIMUM
PLAY OF THE SHREDDING TOOLS
Play
nominal
[mm]
permissible
[mm]
Blade
Ham
mer
Blad
e
Ham
mer
Axial
transverse
0.2
0.3
0.5
0.6
Axial
longitudin
al
0.1
0.2
0.4
0.6
The shredding tools must be replaced in compliance with the specific safety rules.
1. Use only the original and functional parts for the cutting units
2. The replacement must each time include the full set of tools. You must remember
about the uniform distribution of the rotating masses, to ensure the uniform
wear of the tools.
3. The bolt connections need to be replaced with new ones each time the tools are
replaced, paying attention to the durability 8.8 of the bolt and the self-locking nut.
4. When tightening the bolt connection, pay attention to the free (without excessive
play) rotation of the tool in relation to the bolt axis.
