The Instruction Manual
LEO 320 PROFESSIONAL shredder
Page
23
of
37
TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail:
biuro@talex-sj.pl
www.talex-sj.pl
6.5
Lubrication
To ensure the correct performance of the machine, it must be thoroughly and
properly lubricated according to the diagram - Fig. 6.
Fig. 6. Lubrication diagram
All points marked on Fig. 6, equipped with ball grease fittings, should be filled with solid
grease ŁT43 by means of a lubricator. Lubricate the jointed telescopic shaft after removing
it from the machine. Lubricate the telescopic part of the shaft at least after 8 hours of
operation - when the shaft is entirely moved apart and impurities have already been
cleaned.
Everyday
before
work
10 h
30h
60h
