30450712 MPEG-4 Hi-Resolution DVR
27
18.
Pan-Tilt control
Channel – select the relevant channel
PROTOCOL – choose the protocol of the brand name of
corresponding pan-tilt decoder
ADDRESS – is the address of the corresponding PTZ decoder
BAUDRATE – choose the corresponding BAUDRATE OF the decoder
save all the settings and come back to single windows monitor,
then click FN key to set the PTZ control : direction, focus, IRIS,
zoom and pre-set position.
19.
Monitor
Menu output – user can chose the favorite background color and
the transparency as well. The transparency can be chosen from
128 to 255.
TIME TITLE – If highlighted the system time will be attended
channel (Highlight means attend the tour) for the tour.
20.
Default
The system will restore the original setting
21.
Advance
Menu of the advanced setting is as the right picture : Need to input
advanced password before operation including : HDD Manage,
password, alarm output, Alarm input, manual record, net user and
so on.
22. HDD Manage
If 8 HDDs are installed in the DVR, you can choose from 1 to 8 in
HDD No. There are 4 IDE ports. The first IDE port is near the power
socket, the following is the second, third and fourth after choosing
the HDD number the following options display the information
about this HDD. You can also change the attributes of the HDD such
as read only, read/write and format. Then click execute. The new
attribute will take effect after rebooting the system
