Talk-a-Phone ETP-100E, Installation & Operation Manual

Operation

need this function, contact your distributor or Talk-A-Phone Sales department at 773-
539-1100 for upgrade options. 
 

F.

Intelli-Voice "V" Option 

Unless your model phone ends with “V” you do not have voice option. 
 
This recorded message will automatically be heard by the party receiving the call as 
soon as they answer.  Immediately thereafter, two-way conversation will occur.  If 
you wish the message only to be heard upon command by the receiving party, enter 
*70*.  The message will then be heard only if the receiving party enters *59* after 
receiving a call.  The message can be repeated as many times as desired by using 
this command. 
 
The recording can be made at the same time that other programming is done and 
can be changed at any time by calling the unit, entering the Guard Code, and 
recording a new message.  This feature operates independently of the DTMF 
transmission of the unique identifier, which can either be active or suppressed as 
desired. 

G.  Two Button Models (ETP-402, ETP-400D)

Each button on the two-button Phone works just as on a single-button Phone.  
However, the red Emergency button on a two-button Phone always takes priority 
over the lower black button.  If the upper Emergency button is pressed while a 
conversation is taking place via the lower black information button, the first call will 
automatically be disconnected and the emergency call will immediately be placed. 
 

H.  Keypads (ETP-400K, ETP-402K, ETP-400KS, ETP-402KS)

Some Talk-A-Phone models have a keypad.  These models are denoted with the 
letter "K" in the model number.  When the black call button is pushed, the user will 
hear a dial tone and can then use the standard 12-key pad to dial any number that 
has been authorized for that telephone line.  When the called party answers, simply 
speak hands-free.  When the called party hangs-up the unit will automatically 
disconnect. 
 
Anytime the red Emergency button is pushed, the phone will automatically place the 
emergency call.  If a conversation is taking place it will automatically be disconnected 
and the emergency call placed.  To hang up the phone when placing a non-
emergency call, simply press the lower button a second time.   
 
Note: The black call button is used to take the phone off hook before placing a call 
with the keypad.  This button 

cannot

 be programmed with an autodial phone number 

and it 

cannot

 be used to automatically activate an auxiliary output.