Talk-a-Phone ETP-100E, Installation & Operation Manual

Software Programming

if one is programmed, or the first number if no second phone number exists.  It will 
retry these numbers until the call is answered or the conversation time elapses (see 
PBX/Configuration Codes, page 10). 

If your phone has two buttons, the top button is Button #1 and the bottom button is 
Button #2.  If you have a Keypad phone, Button #2 

cannot

 be programmed to dial an 

outside number.  This button is used to get a dial tone before using the keypad to 
dial. 

Entering "#" inserts a four second pause when placed in a dial string.      

For example: 

•  When using 9 to obtain an outside line, enter "9#" and then the number 

desired.  This allows the phone system to switch to an outside line without 
missing dialed digits. 

•  When dialing pagers or voice mail systems, use "#" in the number string 

where a pause is required. 

F.  Speaker & Microphone Codes 

The speaker and microphone turn on automatically when the unit is activated.  The 
caller will hear dial tone, dialing, and busy signals.  You may wish to silence these 
call progress tones.  You may also wish to activate the silent call in feature by 
activating the speaker and microphone when 

you

 call the 

unit

. 

Command  Function 

*5* 

Turns on unit speaker & microphone when you call in to the unit.  Effective for 
that call only. 

*78* 

Automatically turns on unit speaker & microphone every time you call in to the 
unit. 

*79* 

Cancels the *78* command 

(default)

*19* 

Makes call progress tones audible 

(default)

*20* 

Makes call progress tones silent (Mode I only) 

If *78* has been programmed, future calls to the unit will begin in communication mode.  
To perform any programming, hold the * button down for a full second prior to entering the 
guard code. If the phone you are calling from cannot play a tone for 1 second (e.g. a cell 
phone), you may need to call from a different phone. 

Command Function 

*13* …[up to 18 digits]* 

Programs the primary number called by Button #1 

*23* …[up to 18 digits]* 

Programs the secondary number called by Button #1 

*80* …[up to 18 digits]* 

Programs the primary number called by Button #2 

*81* …[up to 18 digits]* 

Programs the secondary number called by Button #2