Talk-a-Phone ETP-400KE, Installation & Operation Manual

10-Number Autodialing Keypads

V. 10-Number Autodialing Keypads (ETP-400KE, ETP-400KSE, ETP-402KE, 

ETP-402KSE) 

A.

Programming 

To program the autodialing phone numbers for buttons 0-9, use the following 
codes: 

*13* …[up to 11 digits]* 

Programs the phone number called by the RED button (if available) 

*23* …[up to 11 digits]* 

Programs the phone number called by keypad button #0 

*80* …[up to 11 digits]* 

Programs the phone number called by keypad button #1 

*81* …[up to 11 digits]* 

Programs the phone number called by keypad button #2 

*89* …[up to 11 digits]* 

Programs the phone number called by keypad button #3 

*90* …[up to 11 digits]* 

Programs the phone number called by keypad button #4 

*91* …[up to 11 digits]* 

Programs the phone number called by keypad button #5 

*92* …[up to 11 digits]* 

Programs the phone number called by keypad button #6 

*93* …[up to 11 digits]* 

Programs the phone number called by keypad button #7 

*94* …[up to 11 digits]* 

Programs the phone number called by keypad button #8 

*95* …[up to 11 digits]* 

Programs the phone number called by keypad button #9 

 
To set the dialing speed, use the following codes: 

*96*  

51ms on/off dialing speed 

(default) 

*97*  

102ms on/off dialing speed

For other programming information, such as how to program for operation on a 
PBX, timing codes, etc., see Section III (page 6). 

B.

Operation 

If the phone has a red button, pressing it will automatically dial the pre-programmed 
number and operate the auxiliary outputs if it is programmed to do so.  On these 
units, there is no backup number for the top button. 

 
When the black call button is pushed, the user will hear a dial tone and can then 
use buttons 0-9 on the-keypad to dial one of ten pre-programmed numbers.  When 
the called party answers, simply speak hands-free.  When the called party hangs-
up the unit will automatically disconnect.  To hang up the phone while it is active, 
simply press the black button a second time.   When the call is in progress, the 
keypad is active for use with message systems, to enter a mailbox number, etc. 

The black call button is used to take the phone off hook before placing a call with the keypad.  
This button 

cannot

 be programmed with an autodial phone number and it 

cannot

 be used to 

automatically activate an auxiliary output.