WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page
22
of
53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.7.4. Date and Time
The Date and Time page allows you to set the date and time of the communications module.
Login → Maintenance → Date & Time
Figure 26 Date and Time Setting
To set the date and time:
1.
Select
Enable NTP
to set the communications module to use Network Time Protocol.
2.
If using NTP, enter the
IP Address
of the NTP Server.
3.
If using NTP, select the
Time Zone
from the drop-down menu.
4.
If manually entering the date and time, enter the
Date
in MM/DD/YYYY format.
5.
If manually entering the date and time, enter the
Time
in HH:MM:SS 24-hour format.
6.
Click
Apply
to save settings. NTP settings will automatically update the date / time.
1
6
2
3
4
5
