AOR Series Analog Stations
Installation & Operation Manual
Page
3
of
27
Rev. 1/7/2022
Copyright 2021-2022 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone,
LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
1. Getting Started
Introduction
Thank you for your purchase of this AOR Series Analog Station. All Talkaphone equipment is built with
an exceptional standard of quality and will provide years of reliable service.
This manual will guide you through the installation of this product and provide comprehensive operating
instructions. Please read this instruction manual COMPLETELY before you install this product.
Once you have installed the product and are familiar with its operation, store this manual in an
accessible location for future reference.
What
’s In the Box
•
AOR Series Analog Station
•
Owner Information Card
•
Instruction Manual
•
Qty. (4) 6-32 Stainless Steel TS-10 Pin-in-Torx screws (P/N 42937)
You should inspect the AOR Series Analog Station when unpacking the box for possible
damage in shipment. If it is damaged or any of the components are missing, please contact
your Talkaphone dealer or distributor immediately. Do not discard any hardware or packing
material before you are certain you have all the items listed above, and the unit is installed and
functioning correctly.
Technical Requirements
•
When connected to an analog AOR Command Unit, the line must provide a minimum of 24V at 20
mA off-hook (no current is drawn on-hook).
