AOR Series Analog Stations
Installation & Operation Manual
Page
7
of
27
Rev. 1/7/2022
Copyright 2021-2022 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone,
LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
3. Auxiliary Inputs/Outputs
All AOR Series Analog Station models include
one (1) Auxiliary Input
. Some models are
optionally
available in a configuration that provides one (1) Auxiliary Output
(only model numbers with the
-
1RO
designator).
Auxiliary Input
The Auxiliary Input connection is comprised of the
red-red wires
. This input accepts a standard dry
contact closure.
Auxiliary Output
The AOR Series Analog Station is
optionally available in a configuration that provides one (1)
Auxiliary Output
(only model numbers with the
-1RO
designator).
The single Auxiliary Output is rated at a maximum of 500 mA at 200VDC. This Auxiliary Output
provides a dry contact closure when the unit goes off-hook.
The
Auxiliary Output
connection can be found on
N.O.
and
COM
pins.
