7
z
/- direction to install 3 AAA size Alkaline batteries
into the 3A battery case (thick case).
z
Power off the PMR, remove the thin battery door and the
Li-ION battery.
z
Insert the top end of the AAA battery case and then push
down the battery knob to close.
Recharging the Battery
When the LCD display shows the battery level is low, you must
charge the battery with the enclosed AC/DC Adaptor or Desktop
Charger. The battery has a built-in charging current limit circuit,
when the battery fully charged, the circuit will cut the charge
current automatically to protect the battery.
Charging with the AC/DC Adaptor:
z
Plug the adaptor into the wall socket and plug the other
end into the earphone jack.
z
The unit will automatically turn off, LCD backlight turn on
in ‘RED’ and have no display.
z
Charge time is around 4 hours. Once fully charged, the
LCD backlight will turn to ‘Green’.
During charging, the unit will slightly warm.
Charging with Desktop Charger
z
Plug the adaptor into the desktop charger.
z
Put the unit into the charger.
z
During charging, the RED LED of the charger will be on &
the unit remains on.
z
The charging time is around 6 hours. Once fully charged
the LED of the charger will turn Green. Take out the radio
out of the charger to stop charging
Warning: To avoid damage to the unit, use original accessories.
only
