T A L K S W I T C H C O N F I G U R A T I O N
1 9
2.3.3.1 Administration
This screen allows you to assign a System name and Administrator password
for TalkSwitch. The Administrator password gives access to all configuration
options. The password that is entered is used at configuration start-up and
throughout Touch Tone configuration.
System Name:
For tracking purposes, a system name can be assigned.
System
Password:
To activate the use of a system password, enter a 4- to
8-character numeric password. The password is also used
to gain access to the system using a touch-tone phone.
If you do not want a password leave the field blank. To
delete a password, enter the existing password. Click on
the password field again but do not enter anything and
click ‘Ok’.
For TalkSwitch models with VoIP lines, the system name
or extension names can be used to appear as Caller ID
information for all outgoing VoIP calls.
Note:
Sections 2.3.3.2 and 2.3.3.4 only apply to models with a LAN port.
Owners of models without LAN ports can go to section 2.3.3.5 —
Telephone Lines.
