41
2.0
Configuring TalkSwitch
Dial notification phone number…
These parameters control which Hunt Group is used for both the Remote
Phone and Pager Notification calls. It also allows you to adjust the number
of rings before it will abort the attempt then follow the parameters listed in
the next section.
If attempt unsuccessful…
These parameters control how many times TalkSwitch will try to notify the
Remote Phone or Pager before it will abort the entire notification attempt.
You can also specify the time interval between attempts.
2.3.2.4 Global Settings
Any changes made to Global Settings will affect all system voice mailboxes.
Global Message Waiting Indicator:
This option can be useful if you only use one or a couple of voice mailboxes.
Anytime a new message is left in any active voice mailbox, the Power/Data
light will pulse very slowly to indicate that there is at least one new message
in one of the mailboxes. Once all new messages have been heard, this light
will return to the default state of being on solid.
Mailbox Settings:
The first option controls the order that messages are played back when
listening to voicemail. The default setting plays messages back starting with
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 41
