T A L K S W I T C H C O N F I G U R A T I O N
2 5
Proxy Server Name:
If this location is acting as the Proxy Server, it is filled in automatically.
If this location is not the Proxy Server, then enter the IP address or
domain name associated to the Proxy Server. If the Server is using a
different port number than the default, specify the port number after a
colon at the end of the domain or IP address.
Example 222.234.432.234:5061
Registrar Server Name:
If this location is acting as the Registrar Server, it is filled in
automatically. If this location is not the Registrar Server, enter the IP
address or domain name associated to the Registrar Server. If a VoIP
enabled TalkSwitch unit is acting as the Server, both, the Proxy Server
Location and Registrar Server Location fields should have the same
information. If the Server is using a different port number than the
default, specify the port number after a colon at the end of the domain
or IP address.
Example VoIP .domain.com:5061
Outbound Proxy:
If TalkSwitch is being provisioned with a VoIP Service Provider, enter the
Outbound Proxy associated with the Service Provider.
Realm/Domain:
If this location is the Proxy/Registrar, you can assign a realm/domain
name to this unit. (for example, ‘domain.com’). Note: This field is only
required when TalkSwitch is being provisioned with a VoIP service
provider. In this case, enter the realm/domain associated with the
service provider. If this unit is not the Proxy/Registrar, it must have the
same realm as the Registrar Server.
User Name and Password Section
User/Account:
If this location is the Proxy/Registrar and you have enabled
authentication, assign a User/Account name to this unit that will be
required by all other locations for registration purposes. If this unit is
not the Proxy/Registrar and if authentication is required, it must have
the same User/Account name filled in as the Registrar Server.
