7 6
T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
2. At the Auto Attendant message, dial the Hunt Group for which you have
the account password (9 is default). You are prompted for the password.
3. Dial the password and press
to access a TalkSwitch telephone line.
4. At this point, you can dial a number the same way as from the office.
Each TalkSwitch unit has four password activated Call Bridge accounts.
Each account can be configured to allow access to certain Hunt Group(s)
when using Call Bridge.
To activate an account, check the ‘Activate Call Bridge’ box and enter a 4- to
8-digit password. Click the ‘Hunt Group Access’ button and assign the Hunt
Groups for this account.
2.3.7 Options
2.3.7.1 Audio Controls
This section deals with the adjustment of volume and system gain controls.
All the controls on this page update TalkSwitch in ‘real time’. This allows you
to adjust levels during a conversation without having to first save the
configuration to TalkSwitch.
Note:
Call Bridge account passwords are only valid when using Call Bridge
by itself, not when used in conjunction with Call Back.
#
Line hunt group 80 is used for
‘Same Line Connect’. To enable line
hunt group 80, click the check
box next to ‘Allow the use of Same
Line Connect [by dialing 80]’.
