E V E R Y C A L L C O U N T S
5
1. Select the
IP Configuration
page. By default,
Obtain IP and DNS information
automatically
is selected and the area shows IP addresses from the router.
2. Change
Obtain IP and DNS information automatically
to
Use configured IP and
DNS information
in order to lock in the IP addresses.
3. In some cases, the
System IP Settings
area may be blank because your router
has not delivered the IP addresses. If so, enter the following IP addresses from
your LAN administrator:
a) Enter a static IP address for each TalkSwitch unit in the
Unit IP
address
boxes.
b) Enter the
Subnet mask
for the LAN. This address determines the subnet
that the unit IP addresses belong to.
c) Enter the IP address of the
Default gateway
on your network. A gateway is
a hardware device that connects the office network to the Internet. The
router may act as default gateway.
d) Enter the IP address of the
Preferred DNS server
. DNS is a service that is
used to resolve a domain name to an IP address. The router may act as
DNS server.
e) If applicable, enter the IP address of the
Alternate DNS server
.
