Allow Call Bridge :
To allow Call Bridge after a Call Back has been accepted, check the Allow Call
Bridge box. You may also restrict the Hunt Group access using Call Bridge from
this Call Back by choosing the Hunt Group Access button.
The call back number shown will always be the last number TalkSwitch dialed in the
last Prompted Call Back session.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the key. To enter a in a
dialing string you will need to dial
, for a 2 second pause dial 0, and for a
, dial
. When you have completed the entire dial string you need to dial .
2.3.3.3 Call Bridge
How to use Call Bridge:
1. Call into TalkSwitch from any out-of-office telephone.
2.
At the Auto Attendant message, dial the Hunt Group you know you have the
account password for, (let’s say it’s 9 - the default) you will then be prompted
for the account password.
3.
You dial the password and then the key to access a TalkSwitch telephone
line.
4.
At this point you can dial a number as though you were sitting in the office.
44
TalkSwitch User Manual
TS-user manual_Final_3rd.qxd 8/9/01 2:14 PM Page 44
