background image

E V E R Y   C A L L   C O U N T S

                                                                                                                          1 1

Connecting analog extensions and a fax machine to the TalkSwitch unit

Connect the cables from your analog phones to the E1–E8 jacks on the back of the 
TalkSwitch unit. If your system has one TalkSwitch unit, the extension numbers 
for these jacks are 111–118.

If you have a fax machine, the 

Auto Attendant (Menus)

page allows you to set 

its extension number (e.g. 118). Connect the fax machine to the associated jack 
(e.g. E8).

Connecting an external audio source (optional) 

You can add music on hold to your system from an external audio source or 
internal music file.

Connect a 1/8" (3.5 mm) mono phono connector cable from an isolated external 
audio source such as a CD player, tape player, or sound card to the MUSIC jack of 
the TalkSwitch unit.

If your system has multiple TalkSwitch units, you will need to provide audio to 
the MUSIC jack of each unit.

For complete details on configuring music on hold and for using internal music 
files, refer to 

On-Hold/Ringback

 in Chapter 2 of the 

TalkSwitch User Guide

.

Four-extension unit

Eight-extension unit

E1  E2  E3  E4

E1  E2  E3  E4

E5  E6  E7  E8

MUSIC

PA

Summary of Contents for Telephone System



















Reviews: