6
T A L K S W I T C H S T A R T G U I D E
STEP 4 — SET THE PASSWORD AND REGION
1. Select the
Administration
page.
2. Optionally enter the
System name
. This should be the company name, or a
shortened form suitable for use as caller ID during VoIP calls.
3. Enter a
System password
. It has to be a 4- to 8-digit numeric password, so you
can also enter it on a touchtone phone. The system password allows access to
the configuration.
4. If the
Region Selection
area is present, select the country where your
TalkSwitch unit will operate.
5. Optionally load additional languages for system prompts, and set the default
language for system prompts heard by callers and users.
6. Optionally set up how the system will route the call if the user dials
0
(
9
in
some countries). For example, the user can dial
0
to reach the receptionist at
extension 114.
CAUTION:
Use a system password, otherwise the system will be vulnerable to
configuration changes, misuse and/or lock-out by callers or users. If the router
has port 9393 mapped to the TalkSwitch unit for remote configuration, the
system will also be vulnerable to anyone on the Internet.
Change the system password frequently to prevent unauthorized users from
making calls or changing the configuration.
!
"
#
$