TS-100 Owner’s Manual
DURATION COUNTER
A built-in counter will start counting from your reference 6 seconds after you lift the
handset or 6 seconds after you dial a telephone number.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The
MUTE Indicator will light up and remain lighted until you resume your conversation. To
resume your conversation, press MUTE. The MUTE indicator will go out and your call
can continue.
AUTOMATIC MEMORY
To Store A Number In Memory:
1. Press the STORE button, [MEMORY STORING] appears on the display window.
2. Dial the telephone number (15 digits maximum) to store in memory.
Note: The memory locations can be chained together to store numbers of
longer length.
3. Press STORE again.
4. Press the desired memory location.
• To store in an auto memory button (located on right-hand side of base) - Press
1, 2, 3, 4, 5.
• To store in a keypad memory location - Press one of the keypad buttons (l, 2, 3,
or 0).
5. Use pull out memory index to write in name and the memory button where it is stored.
To Dial A Phone Number In Memory
1. Lift the handset and wait for a dial tone.
2. Press any memory location.
• To dial an auto memory button (located on right-band side of base) - Press the
desired auto memory button (1, 2, 3.... or 5).
• To dial a keypad memory location - press the MEM DIAL button first, and then
the desired keypad button (1, 2, 3.... or 0).
3. The number will be displayed and dialed automatically.
VOLUME BUTTON
A built-in amplifier feature allows you to increase the listening volume in the receiver of
the handset when speaking with your party. When needed, press the VOLUME button to
achieve three different levels. The volume will go back to default after you hang up the
handset.
Telephone Features
5
