1 0
T S - 3 5 0 i U S E R G U I D E
IP Address
By default the phone is configured to use DHCP to automatically assign an IP address and other LAN
parameters. Assigning a static address for the Network Mode requires manual entry of an IP address and
other parameters stated in the previous section. The phone
requires
a valid available IP address for proper
operation.
To set the IP Address:
•
Press the
button, then select
1. Network Configuration
, then
2. IP Address
.
•
Input the IP Address using the dial pad and press the
OK
softkey to
save the changes.
Subnet Mask
Selecting static addressing for the Network Mode requires manual entry of a subnet mask. The IP phone
requires a valid subnet for proper operation.
To enter the Subnet Mask:
•
Press the
button, then select
1. Network Configuration
, then
3. Subnet
.
•
Input the Subnet Mask using the dial pad and press the
OK
softkey
to save the changes.
Default Gateway
Selecting static addressing for the Network Mode requires manual entry of a default gateway address. The
IP Phone requires a valid default gateway address for proper operation.
To assign the Default Gateway address:
•
Press the
button, then select
1. Network Configuration
, then
4. Default Gateway
.
•
Input the Default Gateway IP address using the dial pad and press
the
OK
softkey to save the changes.
Primary DNS Address
The phone uses the primary DNS server to resolve any FQDN entries to an IP address.
To assign the Primary DNS Address:
•
Press the
button, then select
1. Network Configuration
, then
5. Primary DNS Address.
•
Input the Primary DNS Address using the dial pad and press the
OK
softkey to save the changes.
