E V E R Y C A L L C O U N T S
2 3
Line Ring Setting
To adjust the Ring Type for a line:
•
Press the
button, then select
3. Phone Settings
then
2. Ring Settings
.
•
Dial the line number plus one (2 for Line 1 or 3 for Line 2), or move the cursor to
Line
n
Configuration
using the
Down
softkey and press the
Select
softkey. The value of
n
is the line button
number.
•
Press the
digit, or move the cursor to
1. Ring Type
using the
Down
softkey and press the
Select
softkey.
•
Select the Ring Type using the
Down
softkey. Press the
Play
softkey
to hear the selected tone. The
Disable Ringer
selection turns the
ringer off for incoming calls on the line. The
Set as Default
uses the
Default Ring Type for incoming calls on the line as specified in the
previous
Default Ring Type
section.
•
Press the
Select
softkey to save the selection.
•
To configure another parameter, press the
Back
softkey to continue or press the
button to exit
the configuration menu.
Delayed Ring
The phone can delay when the audible ring tone is played for incoming calls by up to 10 seconds. To
configure the Delayed Ring option:
•
Press the
button, then select
3. Phone Settings
then
2. Ring Settings
.
•
Move the cursor to
Line 1 Settings
using the
Down
softkey and press the
Select
softkey. Repeat for
Line 2.
•
Press
or move the cursor to
2. Delayed Ring Timer
using the
Down
softkey and press the
Select
softkey.
•
Enter the delay time as 0 to 10 seconds in 1-second increments.
0 provides no delay; the ring signal is immediate.
•
Press the
OK
softkey to save the delayed ring setting.
•
To configure another parameter, press the
Back
softkey to continue
or press the
button to exit the configuration menu.
Disable Ringer
The TS-350i can be programmed not to ring when an incoming call is received. It will still light up the LCD,
light up the Incoming Call Indicator and show the Caller ID.
To disable the ringer:
•
Press the
button, then select
3. Phone Settings
, then
3. Disable Ringer
•
Press the
Yes
softkey to turn the ringer off, or press the
No
softkey
to leave the ringer enabled.
•
To configure another parameter, press the
Back
softkey to continue
or press the
button to exit the configuration menu.
