A D D I N G I P P H O N E S T O T A L K S W I T C H
9
If the phone has TS-50e expansion modules installed, use the pull-down menu to select the
number of modules installed. Select the tab associated to each module and configure the
keys.
3. Optionally, you can apply predefined key assignments from a template file using the
Open
Template
button. See
Using a key assignment template
on page 8.
If necessary, use the
Default
button to restore the keys to their default settings.
4. Use the
button to print a label showing the key configuration. Cut out the printed
label and insert it in the phone next to the key lights.
5. Your key assignments can be saved as a template for programming additional phones. See
Saving a key assignment template
on page 8.
Programming TS-550i function keys
1. Click
Configure Keys
. This button is enabled if the
IP Extension Details
area is complete.
The
TalkSwitch 550i
window appears.
2. Select up to 22 softkey options. For each option, select the
Function
and the
Resource
(if
applicable). The function keys can be assigned for Line Appearance, Extension Appearance,
Queue Appearance, Voicemail, Do Not Disturb (DND), Phone Book access, Speed Dial, Park,
Unpark, Call Pickup (any or specific extension), Group Page, Overhead Page, or User Defined
(phone). For further details, click the Help icon in the
IP Extension Details
area.
If the phone has TS-50e expansion modules installed, use the pull-down menu to select the
number of modules installed. Select the tab associated to each module and configure the keys.
