A D D I N G I P P H O N E S T O T A L K S W I T C H
2 2
a) Press the
Options
softkey.
b) Choose
Insert symbol
, and then press the
OK
key.
c) Use the navigation keys to choose the period, and then press the
OK
key.
6. Press the
Save
softkey to accept the changes, and then press the
Back
key.
7. When prompted to reboot the base, select
Yes
. The TS-850i or TS-860i will automatically
download the configuration from the TalkSwitch system.
Using the TS-850i or TS-860i with a traditional phone line
NOTE: If you connected the telephone cable from the Line port on the base to the telephone wall
socket, you can use the TS-850i or TS-860i with a traditional phone line.
When connected to the traditional telephone network (PSTN) or to a TalkSwitch system as an
analog extension, FLASH is engaged by pressing the
R#
key on the TS-850i and the
key on
the TS-860i. The key MUST be held for approximately 2 seconds until you connect to the other
caller (call waiting) or receive dial tone to initiate a calling feature.
Further configuration
The steps above will configure your TalkSwitch IP phone and will enable the programmable keys.
Click the
Local Extension/Fax
Help
icons for instructions on configuring direct line access,
hunt group permissions, Caller ID settings (VoIP only), call handling, and voicemail.
For phone-specific configuration, refer to your phone user guide.
Contact your reseller or TalkSwitch Customer Support if you require further assistance with
special ports or network settings.
Checking and updating firmware
Occasionally, you may want to check and/or update the TS-850i or TS-860i firmware.
To check the firmware version:
1. In Idle mode, press the
Increase Volume
button on the left side of the handset. After a
brief delay the phone will display a System Status screen.
2. Press the down arrow button to show the second screen, which includes the firmware version
(next to the title "SW:").
NOTE: If your installation uses repeaters to extend the range of the handsets, turn the repeaters
off and bring the handsets within range of the bases before updating the firmware.
For instructions on obtaining firmware for your region and language, contact your Authorized
TalkSwitch reseller. If you purchased directly from TalkSwitch, visit
http://
global.talkswitch.com
to obtain further information or assistance.
For more information, refer to the Troubleshooting section in your phone user guide.
