4 0
T S - 5 5 0 i U S E R G U I D E
Line based parameters
•
Proxy Address:
The IP address or FQDN of the phone system, SIP server or SIP proxy.
•
Proxy Port:
The server port for incoming SIP requests and outgoing responses.
•
Display Name:
The name used for outgoing Caller ID. The display name assigned for Line 1 also
displays on the LCD display when idle.
•
Name:
The name (phone number) used during registration. The name is generally the telephone
number or the SIP user ID assigned by the administrator or service provider.
•
Authentication Name:
The user ID for authentication of the line with the phone system or SIP
server/service.
•
Authentication Password:
The password for authentication of the line with the phone system or SIP
server/service.
•
Line Type:
The type of line. Private, Shared (BLA), or DSS line.
•
BLA Primary Address:
If the line is set to BLA, enter the IP address or FQDN of the server providing
BLA status to the phone.
•
Extension for DSS:
The extension number associated with the line when the type is DSS. Do not enter
an extension number unless the Line Type is set to DSS.
•
Ring Type:
Sets the ring tone for incoming calls on the line. The Ring Type can be Set as Default,
Ringer Off or Ring type 1 to 4, 101 to 105 or 201 to 205. The default ring is configured under the
Phone Settings
menu.
•
Delayed Ring:
Delays the audible notification (ring) for a line. The delay is set in 1-second increments
from 0 (no delay) to 10 seconds.
•
Auto Answer:
If enabled, the phone will automatically enter speakerphone mode for incoming calls
on this line.
•
Registration Status:
Shows the registration status of the phone. Refresh the page if it doesn’t match
the status indicated on the phone.
General Parameters
•
Outbound Proxy Address:
The IP address or FQDN of the outbound proxy server to receive SIP
requests in place of the line-based Proxy Server.
•
Outbound Proxy Port:
The port of the outbound proxy server.
•
Backup Proxy Address:
The IP address or FQDN of the backup proxy server, used when the connection
with the primary proxy times-out.
•
Backup Proxy Port:
The port of the backup proxy server.
•
Domain:
The domain for SIP service when the service provider desires to use a specific SIP domain.
•
VMS Address:
The address (IP or phone number) of the Voice Mail Server.
•
Proxy Registration:
Enables SIP registration to the proxy. This parameter is ignored if an Outbound
Proxy Address is not defined.
•
Registration Timer:
Sets the interval (in seconds) between SIP registration renewal attempts.
•
Local UDP Port:
The UDP port used on the LAN for sending and receiving SIP packets.
•
Local TCP Port:
The TCP port used on the LAN for sending and receiving SIP packets.
•
Local TLS Port:
The TLS port used on the LAN for sending and receiving SIP packets.
•
TCP Port:
The TCP port used on the LAN for sending and receiving SIP packets.
•
TLS Port:
The TLS port used on the LAN for sending and receiving SIP packets.
•
Transport Mode:
The packet transport mode for voice traffic. UDP is most widely used by most
services. TalkSwitch phone systems use UDP.
