Talkswitch TS-9133i, Installation Manual

Model TS-9133i Installation Guide

13

Customizing your Phone

Customizing your Phone

An admin password may be required in some cases to access or 
configure specific parameters on the phone. The default password is 
22222. Once TalkSwitch has provisioned the phone, the new admin 
password is 23646 (spells ADMIN).

Internal Use

When connecting your IP phone to the same LAN as TalkSwitch, first 
ensure you have already configured this extension’s information and 
MAC address in the TalkSwitch configuration software. Once 
configured and saved to TalkSwitch, connect the phone to the LAN then 
power it up. It will automatically detect TalkSwitch on the LAN and 
configure itself. 

External Use

When connecting your IP phone at a remote location for external use, 
please perform the following steps:
1. Pre-configure the extension in the TalkSwitch configuration software 

and include the MAC address of the phone.

2. Before or after deploying the phone, power up the phone and select 

Options, then Network Settings. 

3. Enter the administrative password for the phone set. If no password has 

been previously set by your phone System Administrator, enter a 

password of either ’22222’ or ’23646’.

4. From the Network Settings menu, select 

TFTP Server

 then 

Primary 

TFTP

. Enter the WAN (External) IP address or URL/FQDN of your 

TalkSwitch location.

5. Press Done then reboot the phone. It then connects to the TalkSwitch 

system and updates its configuration. 

If you encounter problems, please ensure the appropriate ports are 
forwarded from the router to the TalkSwitch unit acting as the proxy at 
that location; for more information, see the 

TalkSwitch User Guide

. 

There should be no need to make any adjustments to the firewall at the 
IP phone’s location.

Setting your Options

There is a list of configuration options, accessed by pressing the 

I

button. 

1. Press the 

I

button on the phone to enter the options list.

2. To go to an Option, use the 

V

 and 

W

 to scroll through the list or press 

the number corresponding to the Option.

3. To select an Option, press the 

U

button beside the Option you want.

4. Once you are in the options menu, follow the on-screen menu 

instructions to advance to the next sub-menu or to enter an option  (i.e. 

“Press 

V

 for next and 

U

 to enter”).

5. Follow the on-screen menu instructions to save changes and exit the 

current option.

6. Press the 

V

 or 

N

 button at any time to exit without saving the 

changes.