Talkswitch TS-9133i, Installation Manual

14

Model TS-9133i Installation Guide

Customizing your Phone

The following options are configurable on the TS-9133i IP Phone:

Language

Select a language for the display prompts. 

Note: Supported languages may vary.

Set Ring Tone

Use the 

W

 and 

V

 to scroll through the list and select an Option. Use 

the volume bar to increase or decrease the ringer volume level. 

Clear Message Waiting

Use the 

W

 and 

V

 to scroll to the option and press 

U

 to clear. The light 

flashes again when there are new messages waiting.

Contrast Level*

Use the navigation arrow keys to cycle through 8 contrast settings, 
which brighten or darken the display. 

Live Dial Pad*

This option turns the Live Dial Pad mode on or off. With Live Dial Pad 
ON, the TS-9133i IP Phone automatically dials out and turns ON Hands 
free mode as soon as a dial pad key is pressed. With Live Dial Pad OFF,  
if you dial a number while the phone is on-hook, lifting the receiver or 
pressing the 

q

will initiate a call to that number.

Headset Settings

This option lets you:
a) choose your preferred audio mode.
b) select your headset mic volume.

Audio Mode

The TS-9133i allows you to use a handset, a headset or handsfree to 
handle incoming and outgoing calls. The audio mode option provides 
different combinations of these three methods to provide maximum 
flexibility in handling calls. There are four audio mode options to 
choose from:
• Speaker — this is the default setting. Calls can be made or received 

using the handset or handsfree speakerphone and can be switched 

between the two modes by pressing the 

q

 button on the phone. In 

Speaker audio mode, lift the handset and press 

q

 to switch 

between handsfree speakerphone and the handset.

• Headset — choose this setting if you want to make or receive all calls 

using a headset. Calls can be switched between the headset and handset 

by pressing the 

q

 button on the phone.

• Speaker/Headset — incoming calls are sent to the handsfree 

speakerphone. By pressing the 

q

 button on the phone you can 

switch between the handsfree speakerphone, the headset and the 

handset.

• Headset/Speaker — incoming calls are sent to the headset. By pressing 

the 

q

 button on the phone you can switch between the headset, 

the handsfree speakerphone and the handset.