Talkswitch TS-9133i, Installation Manual

Model TS-9133i Installation Guide

1

Introduction

Introduction

Congratulations on your purchase of the Model TS-9133i IP Phone! The 
TS-9133i communicates over an IP Network, allowing you to receive and 
place calls in the same manner as a regular business telephone. This 
release of the TS-9133i is capable of supporting the SIP protocol. 

Phone Features

• Three line adjustable backlit display screen
• 3 line/call appearance buttons with corresponding LEDs
• 7 programmable keys with LEDs - can be programmed as feature keys, 

or additional Line/Call appearances

• Speakerphone for handsfree calls
• Built-in two-port, 10/100 Ethernet switch which lets you share a

connection with your computer

• Inline power support, which eliminates power adapters
• Power Adapter

Requirements

• SIP based IP PBX system or network installed and running with a SIP 

account created for the TS-9133i phone

• Access to a Trivial File Transfer Protocol (TFTP) server
• Ethernet/Fast Ethernet LAN (10/100 Mb)
• Category 5/5e straight-through cabling
• Power source

For Ethernet networks that supply in-line power to the
phone (IEEE 802.3af):

—  For power, use the Ethernet cable (supplied) to connect from 

thephone directly to the network. (No 48v AC power adapter 
required.)

For Ethernet networks that DO NOT supply power to the phone:

— For power, use the 48V AC Power Adapter (included) to connect 

from the DC power port on the phone to a power source.

or

— (optional) For power, use a Power over Ethernet (PoE) power 

injector or a PoE switch. Contact your System Administrator for 
more information.

About this Guide

This guide describes how to physically set up your new TS-9133i. Not all 
features listed are available by default and some may depend on your 
phone system or service provider. Contact your System Administrator if 
you have any questions on what features and services are available to 
you on your system.