1 2
T A L K S W I T C H V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
SETTING UP A MULTI-BRANCH PROFILE FOR THE SIP SERVER
The multi-branch profile for the SIP server shows registration details and contains authentication
information.
1. Connect to the system that will act as the SIP server.
2. Select the
VoIP Configuration
page.
3. Select
Profile MB
, which is for configuring the multi-branch profile.
4. Set the starting number for VoIP numbers range. A range of 50 numbers is reserved for VoIP
numbers in the system. The range will begin with the number you put here.
5. Leave the
Disable public IP address substitution
checkbox cleared.
6. Select the
This location is the Proxy/Registrar
checkbox.
7. Set
Registrar authentication
to
Yes
. This restricts access and allows only authorized devices to
connect.
8. Enter a
User/account
name. All SIP clients must use this name.
9. Enter a
Password
. All SIP clients must use this password.
10. Ensure your router is set up to perform port forwarding for the SIP Signalling and RTP ports.
See
Configuring the router
on page 6.
Y
Z
`
\
]
^
_
[
