2 4
T A L K S W I T C H V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
4. Enter a
Hunt Group name
. The default name is
Hunt Group
.
5. Set
Line type
to
multi-branch VoIP
or
SPn VoIP Service
.
6. Select the overflow hunt group. Choices are
no overflow
and the other activated hunt groups. If you
select an overflow hunt group, ensure it contains different lines than the original hunt group.
ADVANCED VOIP CONFIGURATION
Optionally, perform advanced VoIP configuration.
Setting up caller ID
The
VoIP Caller ID
area allows you to set up the source for caller ID for outbound VoIP calls. The same
setting is used for the multi-branch profile and all service provider profiles. Extension names are used
by default.
1. Select the
VoIP Configuration
page.
2. Set the caller ID for outbound VoIP calls.
•
To use the
System name
from the
Administration
page, select
Use System Name in caller ID
information for all outgoing VoIP calls
.
•
To use the
First name
and
Last name
from the
Local Extension/Fax
page set up for each
extension, select
Use Extension Names in caller ID information for all outgoing VoIP calls
.
