The Menu
User guide
74
Ethernet speed (EthSpeed)
Specifies the transmission speed of the Ethernet interface.
Press
EthSpeed
(3) key.
Setting Options:
Auto-Sense, 10Mbit Half, 10Mbit Full,
100Mbit Half, 100Mbit Full
Default Setting:
Auto-Sense
Auto-Sense:
The transmission speed is detected automatically.
10Mbit Half:
Sets the transmission speed to 10 MBit half duplex per
second.
10Mbit Full:
Sets the transmission speed to 10 MBit full duplex per
second.
100Mbit Half:
Sets the transmission speed to 100 MBit half duplex
per second.
100Mbit Full:
Sets the transmission speed to 100 MBit full duplex
per second.
It is recommended that the ethernet interface transmission
speed setting of the printer and the connected transmission
device coincide. The printout of the current menu settings
contains the ethernet link status (item
EthConnected
).
Confirm the setting by pressing the
Set
key (1).
Press the
Next
key (4) to leave the parameter group
Interf.
. Press
the
Next
key (4) again to access the next group of parameters.
Summary of Contents for 2365
