User guide
The Menu
85
Normal characters and
barcode (Barmode)
Allows printing of normal characters on the left and right of the bar-
code.
Press
Barmode
(3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options:
Secured/Unsecured
Default Setting:
Unsecured
In
secured
mode, the space which the barcode characters require is
“protected”. In each line, other barcode or normal characters can also
be printed. These additional characters are printed in the line currently
being printed and and in the subsequent lines, without affecting the
barcode which is already being printed. Consequently, normal charac-
ters can be printed in every line to the right or left of the barcode.
In
unsecured
mode, the required paper transport for printing barcodes
and LCP is carried out automatically, it is not possible to print more
than one line of normal characters in the barcode line. All characters in
the mixed line are printed such that their bottom edges are in a straight
line. This function may be switched on and off by sequences.
This function can be activated/deactivated by sequences.
Confirm the setting by pressing the
Set
key (1). Press the
Next
key
(4) to access the next group of parameters.
Vertical position after
oversized barcode (BarTop)
This paramater controls the vertical position of characters with stan-
dard height which follow oversized characters.
This function is only effective in Genicom ANSI emulation.
Press
BarTop
(2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options:
Off/On
Default Setting:
Off
Barcode Barmode
Online
Setup
2
1
3
4
Back
Next
Secured
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Summary of Contents for 2365
