Paper handling
Quick start guide
24
Moving the paper to the tear
position
Your printer by default moves the paper into tear position once paper is loaded. If
you deactivate this feature in the printer’s menu (setting:
Manual
) you can use the
Tear
key to move the paper to the tear position (for more information, please refer
to the User guide on the Online CD-ROM).
Swing the soundproofing cover towards the front (see “Printer at a glance”,
page 5). The tear edge is located at the front side of the paper output opening.
Make sure that the printer is in online mode (
Ready
). If necessary, press the
On-
line
key.
Press the
Tear
(4) key. The printer moves the perforation edge of the fanfold paper
to the tear edge of the top cover.
After having torn off the paper, press the
Online
key. The printer returns the paper
to the first printing position.
If a print job is active, the printer automatically returns the paper to the first print-
ing position.
The tear function can be deactivated completely (
No Tear/Reverse
). In this condi-
tion the
Tear
key is not accessible; the paper can not be moved reverse (for more
information, please refer to the User guide on the Online CD-ROM).
Ready
Front1
M1 EPS
Tear
Online
Setup
2
1
3
4
Ready
Front1
M1 EPS
Online
Setup
2
1
3
4
Tear edge
Quick Start-en.fm Seite 24 Donnerstag, 17. Juni 2004 9:36 09
