3–19
Chapter 3: Printer Menus and Configuring Your Printer
Codes Category
In this category are parameters that allow you to determine the printer’s re-
sponse to certain conditions and to assign values to parameters that are used
by other commands or escape sequences. For the IPDS Emulation, these
options have no function.
Auto LF (Line Feed)
Auto LF causes the printer to perform a Line Feed each time it receives a
Carriage Return Control Code. This parameter is available for host systems
that cannot send a Line Feed Control Code.
Some computers automatically generate a Line Feed of their own at the right
margin. If your system does this and if Auto LF is enabled, it will result in a
double-space between lines of print. Consult your computer manual to deter-
mine whether this function should be turned off or on. Default is OFF.
Auto CR (Carriage Return)
Auto CR allows the printer to perform a Carriage Return (moves print location
to the left margin) when it receives either a Line Feed or Vertical Tab Control
Code. OFF is the default value. The default value is dependent on the emula-
tion (see Emulate under the Config Menu, Printer category).
Line Wrap
If the printer gets to the right margin without receiving a paper movement
command, the Line Wrap Parameter dictates how the rest of the data will be
treated. If Line Wrap is OFF the excess characters are lost. If Line Wrap is
ON, printer response is determined by the Wrap Line Feed Parameter (see
below).
If Line Wrap is ON and Wrap LF is OFF, the printer performs a Carriage Return
only and overprinting can result.
If Line Wrap is ON and Wrap LF is ON, the printer performs a Carriage Return
plus a Line Feed and excess characters are printed on a new line at the left
margin.
The default value is dependent on the emulation (see Emulate under the Config
Menu, Printer category).
Wrap Line Feed
This parameter works in conjunction with the Line Wrap parameter, above. The
default value is dependent on the emulation (see Emulate under the Config
Menu, Printer category).
Summary of Contents for T6212
