background image

Backpack Blower Owners Manual

9096-320604

CAUTION • PLEASE READ

Before using this product, read this manual and follow all safety rules and operating
instructions.

WARRANTY INFORMATION

AU

1

LANDSCAPER PROFESSIONAL SERIES 

BACKPACK BLOWER 

6 MONTH COMMERCIAL WARRANTY

The benefits conferred by this warranty are in addition to all other conditions and warranties in respect 
of this product which the consumer may have under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939) (The "Company") to be free from defects in material and workmanship for a period of 6 months
from the date of original purchase (for use in commercial applications) and 24 months (for home use).
The Company during the period of the warranty, will at its option, and subject to the conditions stated
herein, repair or replace without charge this product or any component part, which upon examination by
an Authorised Service Agent or by the Company is found to be defective.

Warranty conditions

(This warranty will not apply:
(i)  where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or suited.
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts have not been approved by the Company have been used.

Should service become necessary during the warranty period, the purchaser should contact an
Authorised Service Agent or the Company. In order to obtain warranty service, the purchaser must pres-
ent the store receipt showing the name of the retailer and the date of purchase together with a complet-
ed Warranty Card. The period of the warranty begins from the original date of purchase, notwithstanding
any  subsequent repair or parts replacement. No additional warranty or guarantee other than set out in
this document,  whether written or verbal, is authorised to be made on the Company's behalf. The pur-
chaser shall be responsible for delivery or causing the product to be delivered to the Company or the
Authorised Service Agent and  the purchaser shall be responsible for all charges in connection with re-
delivery of the product and/or the delivery of parts. Damage in transit is not covered by this warranty and
purchasers should remove from the product any liquids (if applicable) before sending and pack the prod-
uct securely to prevent damage.

Warranty exclusions

Normal wear parts or components are subject to separate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not cov-
ered by warranty unless it is found to be defective by an Authorised Service Agent or by the Company.
Normal wear parts include, but are not limited to:

Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser. 

Lubricants

Air Filters

Carburettor Tune-Ups

Spark Plugs

Fuel Filters

Safety Operation
Assembly Maintenance

Summary of Contents for Backpack Blower










Reviews: