3
1 AEOLUS-SENSE
The AEOLUS-SENSE is a portable device that comes with a GPS antenna and with a USB
adaptor for cable connection to a smart mobile device (tablet or smartphone).
1.1 Mounting the AEOLUS-SENSE
The AEOLUS-SENSE should be mounted in a convenient dry place, as far away as possible
from heat sources. A suitable mounting location is the top of the instrument panel. You can
mount the unit by means of double sided adhesive tape or Velcro. Please ensure that the unit
doesn’t move during flight.
Must be connected to the native pitot/static using two 1/8in. BSP to your hoses adaptors.
The AEOLUS-SENSE comes with a GPS antenna. This antenna should be connected at the back
panel of the device and mounted with double sided adhesive tape or Velcro, in a free-to-sky
location for optimal signal reception.
It is important for the AEOLUS-SENSE to be mounted parallel and as close as possible to the
symmetry axes of the airplane (see Fig. 2). The front side of the AEOLUS-SENSE is marked
by a small airplane on the cover of the unit. After mounting the AEOLUS-SENSE the
“AHRS leveling” procedure described in Section 1.5 of the current manual should be
performed, in order to adjust for small inaccuracies during placement.
