3
1 FlySense AoA PRO
The FlySense AoA PRO is a portable device that comes together with a GPS antenna, an ADS-
B antenna, and a USB adaptor for cable connection to a smart mobile device (tablet or
smartphone). FlySense AoA PRO includes a dual-band (978 MHz and 1090 MHz) ADS-B receiver
for traffic and weather information.
1.1 Mounting the FlySense AoA PRO
The FlySense AoA PRO should be mounted in a convenient dry place, as far away as possible
from heat sources. A suitable mounting location is the top of the instrument panel. You can
mount the unit by means of double-sided adhesive tape or Velcro. Please ensure that the unit
doesn’t move during flight.
Must be connected to the native pitot/static using two 1/8in. BSP to your hoses adaptors.
The FlySense AoA PRO comes together with a GPS antenna and an ADS-B antenna. Both
antennas should be connected at the back of the device and mounted with double sided adhesive
tape or Velcro, in a free-to-sky location for optimal signal reception.
Fig. 1. FlySense AoA PRO image.
It is important for the FlySense AoA PRO to be mounted parallel and as close as possible to
the symmetry axes of the airplane . The front side of the FlySense AoA PRO is marked by a
small airplane on the cover of the unit. After mounting the FlySense AoA PRO, the “AHRS
leveling” procedure described in Section 1.5 of the current manual should be performed, in
order to adjust for small inaccuracies during placement.
