background image

 

25 

 

Main Power Minus(-) (factory connected)

 

 

 

 

The device also connects  to a fused connection for continuous power supply and battery 
charging; such connection may be the cigarette lighter plug of the aircraft. Please note that 
battery charges in this case regardless of the battery-switch position (on or off). Always 
make sure to connect with  the  proper  polarity: 

 

The red cable connects to the positive pole (+) 

 

The black cable connects to the negative pole (-) 

 

 

The device also connects  to a fused connection for continuous power supply and battery 
charging; such connection may be the cigarette lighter plug of the aircraft. Please note that 
battery charges in this case regardless of the battery-switch position (on or off). Always 
make sure to connect with  the  proper  polarity: 

 

The red cable connects to the positive pole (+) 

 

The black cable connects to the negative pole (-) 

 

It is suggested that AEOLUS-SENSE PRO is always connected to a power source, and is 
operated with the battery-switch on. 

In case of power-failure

, AEOLUS-SENSE PRO 

will continue its operation after a short reboot (please make sure you 
reconnect to the AEOLUS-SENSE PRO WiFi network)

Please note that, in the latter case, i.e. 

power failure and operation on the internal battery, tethered connection (see below section 1.3, 
paragraph “USB Cable Connection”) to the smart mobile device (smartphone or tablet) 

will not 

work, and you must enable the wifi connection. 

 

Important Note:

 Always make sure to turn the battery-switch off when AEOLUS-SENSE PRO is 

not in operation. In the opposite case, the device will remain turned on, powered by its internal 
battery, until the battery is completely drained. 

 

   

 

 

 

1.3 Software – EFIS TA app

 

 

AEOLUS-SENSE PRO operates with the free EFIS TA app offered by TalosAvionics. EFIS TA 
app has been tested to comply with ASTM F3153 – 15 Standard Specification for Verification of 
Avionics Systems. EFIS TA app runs on smart mobile devices (tablets or smartphones) with iOS 
or Android operating systems. 
 

EFIS TA app for Android can be downloaded from 

Google Play Market. 

    

EFIS TA app for iOS can be downloaded from 

Apple’s App Store. 

             

EFIS TA  software instructions can be downloaded from 

https://www.talosavionics.com/support/

 

PLEASE DO READ THE EFIS TA APP SOFTWARE INSTRUCTIONS! 

Summary of Contents for AEOLUS-SENSE PRO












Reviews: