Installation Manual
RV
Mount
Series
info@tamaracksolar.com
| (800) 819-7236
6
2018 v1.0
Installer Responsibility
The installer is solely responsible for:
i.
Complying with all applicable local or national building codes, including any that may supersede this manual;
ii.
Ensuring that Tamarack Solar and other products are appropriate for the particular installation and the
installation environment;
iii.
Using only Tamarack Solar parts and installer-supplied parts as specified by Tamarack Solar. Substitution
parts may void the warranty;
iv.
Ensuring safe installation of all electrical aspects of the PV array; and
v.
Ensuring correct and appropriate design parameters are used in determining the design loading used for the
specific installation. Parameters, such as snow loading, wind speed, exposure and topographic factor should
be confirmed with the local building official or a licensed professional engineer.
Warranty Information
Tamarack Solar warrants each Mounting Structure to be free from defects in materials and workmanship for ten (10)
years from the date of first purchase (“Warranty Period”), when installed properly and used for the purpose for which it is
designed, except for the finish, which shall be free from visible peeling, or cracking or chalking under normal atmospheric
conditions for a period of three (3) years, from the earlier of 1) the date the installation of the Product is completed, or 2)
30 days after the purchase of the Product by the original Purchaser (“Finish Warranty”). The Finish Warranty does not
apply to any foreign residue deposited on the finish.
Galvanized coated sheet steel components will show rust on cut edges and is normal and will not affect the structure
and function of the mount.
All installations in corrosive atmospheric conditions are excluded.
The Finish Warranty is VOID if the practices specified
by AAMA 609 & 610-02 – “Cleaning and Maintenance for Architecturally Finished Aluminum” (www.aamanet.org) are not
followed by Purchaser for Tamarack Solar’s aluminum based products.
The warranty covers the replacement cost of parts to repair the product to proper working condition. Transportation and
incidental costs associated with warranty items are not reimbursable. The warranty does not cover normal wear, or
damage resulting from misuse, abuse, improper installation, negligence, or accident, or
typographical errors in instruction
manuals.
The Warranty does not cover any defect that has not been reported in writing to Tamarack Solar within ten (10)
days after discovery of such defect. Furthermore, it does not cover units that have been altered, modified or repaired
without written authorization from the manufacturer or its authorized representative, or units used in a manner or for a
purpose other than that specified by the manufacturer. Tamarack Solar’s entire liability and Purchaser exclusive remedy,
whether in contract, tort or otherwise, for any claim related to or arising out of breach of the warranty covering the
Mounting Structures shall be correction of defects by repair, replacement, or credit, at Tamarack Solar’s discretion.
Refurbished Mounting Structures may be used to repair or replace the Mounting Structures
Tamarack Solar shall have no liability for any injuries or damages to persons or property resulting from any cause,
whatsoever, or any claims or demands brought against Tamarack Solar by Purchaser, any employee of Purchaser, client of
Purchaser, end-user of the Product or other party, even if Tamarack Solar has been advised of the possibility of such claims
or demands (collectively, “Third Party Claims”). This limitation applies to all materials provided by Tamarack Solar during
and after the Warranty Period.
