25
24
SET-UP | DISMOUNTING
SET-UP
Figure 3:
8. Place the outer tent (B) on top of the inner tent. Make sure it is
centered and that the entrances are on top of each other.
9. Connect the outer tent (B) to the inner tent construction by using
the Velcro tape.
10. Attach the outer tent (B) to the inner tent by using the clips
provided.
Figure 4:
11. Secure the guide ropes to the ground with pegs (D).
12. You can now use the tent.
Dismounting the tent
Clean the inside and outside of the tent before dismounting it. Dismoun-
ting the tent must be done in reverse order to the setup of the tent.
Packing the tent
Make sure the tent is completely dry before packing it up. Failure to do so
may result in stains and fabric damage.
Caution!
Make sure that you pack the pegs (D) separately in the pockets provided.
Otherwise the pegs (D) could damage the tent. Also pack the other
individual parts in the separate bags provided.
1. Collect all the parts together carefully before packing. Count each
part to ensure no parts have been misplaced or lost.
2. Fold the tent so it has the width of the carry bag.
3. Put the bag for the poles (E) and the bag for the tent pegs (F) in
the center of the tent.
4. Roll up the tent.
5. Then carefully place the rolled-up tent in the carry bag provided.
!
Fig. 4
Fig. 3
x2
B
KUTIR 2 Person Trekking Tent | © Tambu Outdoor GmbH
KUTIR 2 Person Trekking Tent | © Tambu Outdoor GmbH
ENG
ENG
