5
When the machine is powered on, the LCD window will display the last working pre-
set memory setting.
1. TEMP : Top roller temperature
2. TEMP : Bottom roller temperature
3. SPEED ▲▼ : Variable speed from 1~9.
4. MEMORY ▲▼ : Variable memory from 1~2
5. READY : When preset temperature is reached
6. Rollers are running
7. HOT : Machine will initially go to 110°C, speed 3
8. TEMP-T ▲▼: Adjust top roller temperature
9. TEMP-B ▲▼ : Adjust bottom roller temperature
10. SPEED ▲▼ : Variable speed from 1~9.
11. M1~M2, COLD : Programming Memory Values:
1) Press and hold the button for 1 second;
2) Select the temperature and speed;
3) Press the button again to save the entry
12. STBY : Temperature is set to 85°C
13. MEAS-T/B : Measure the actual temperature of
top and bottom rollers.
14. RUN : Run rollers
15. STOP : Stop rollers
16. REVERSE : To help clear rollers
1. Install the top and bottom film brackets
2. Load the film with the adhesive side facing the inside of the roll (adhesive in.)
CONTROL PANEL
MACHINE OPERATION
5
1
2
6
7
8
9
12
14
15
3
4
11
10
13
16
Hot Lamination
Summary of Contents for TCC-1655HC
Page 9: ...9...