English
HELIOS
Connecting motor-run points
When using motor-run points, you need additional adapters AMW-1 or
AMW- plus for the connection between points and shuttle-train control.
Points at both terminus stations:
You need for both points at the
terminus stations a separate adapter AMW-1 or AMW plus and a
bistable relay or a relay print RL-2.
Connection of an
adapter AMW
plus and a
bistable relay at
the terminus
stations 1 and 2.
Hint: The diagram equally applies to 2-rail systems not according to
NEM 631 (e.g. LGB layouts). With 3-rail systems you have to devide the
middle conductor instead of the rail and connect the relay or the relay
circuit board to the middle conductor.
Points at the intermediate stops:
You need only one common
adapter AMW-1 or AMW plus for both points at the intermediate stops,
as these are switched together. An additional bistable relay or a relay
print is not required for the connection of these points.
Page 16
Summary of Contents for HELIOS
Page 59: ...HELIOS English Page 59...
