![background image](http://html1.mh-extra.com/html/tams-elektronik/lc-series/lc-series_manual_3457162030.webp)
tams elektronik
English
LC modules
7.4. Connecting the LC-16
Connecting the dim switch (LC-16)
Connect the dim switch and the light sensitive resistor according to the
connection diagram. The light sensitive resistor has to be placed that
way it is exposed to the ambient light. In order to set the sensitivity of
the dim first set the trim pot to mid-position and change the sensitivity
as far as necessary. The circuit requires 3 or 4 seconds to react.
RL
Monostable relay 1xUm 12 V
D3
Diode, 1N400x, x = 2...7
DS-1
Dim switch
R11
Light depending resistor
Output 1
Additional accessories
Outputs 2-5
Street lamps
Page 30