English
Page 31
§
There is no change over from the first to the second lamp after
switching the points.
Possible cause: The points are not properly connected to the points
indicator.
à
Check the thre connections to the points.
§
A connected relay "rattles" (does not switch properly).
Possible cause: The module is connected to a.c. voltage.
à
Solder a capacitor in parallel to the relay (> 100 µF).
If you cannot find the problem, please return the module for repair
(address on the cover page).
Manufacturer's note
According to DIN VDE 0869, the person who builds this kit or brings the
circuit into operation is the manufacturer of the product. If he sells the
product to another person he is responsible for passing on all the
relevant papers. Domestic appliances assembled from a kit are deemed
industrial products and must comply with health and safety regulations.
Certification
This product conforms with the EC- directive 89/336/EWG on
electromagnetic radiation and is therefore CE certified.
Conditional warranty
This product is guaranteed for two years. The warranty includes free
repair if the problem is due to material failure or incorrect assembly of
the ready-built module by us. Because we have no control over the
assembly of the kit, we can only guarantee the quality of the
components and the completeness of the kit.
Other claims are excluded. By law, we are not responsible for damages
or secondary damages in connection with this product. We retain the