If you experience problems with your Tan.Easy Pro Tools device, in the first instance please read carefully through this Trouble
Shooting section. If you cannot solve your problem please contact us for assistance. If you have further issues, please fill in a warranty
claim at taneasyprotools.com
PROBLEM
The Black Panels have become loose or have fallen out.
REASON
•
The Tan.Screen Section has not been removed
from the box correctly
•
The Panel has become loose in transit
•
The Aluminum Frame has become loose and
needs to be tightened.
ACTION
Refer to Page 7 of this Manual: Assembly: Alluminum
Frame.
PROBLEM
My Screen will not fit together correctly and I have
metal posts sticking out at the top and bottom.
REASON
•
Each section has not been stacked correctly
•
Some Sections have been stacked with front
facing or back facing.
ACTION
•
Ensure you have stacked each section correctly,
Section 'A' being on the bottom, Section 'C' being
the top.
•
Ensure each section is facing all the same way
(Front & Back) when stacking on each other.
•
Refer to Page 4 of this Manual: Assembly : Tan.Fresh
Air Screen.
PROBLEM
The Tan.Screen does not appear level and straight
when assembled.
REASON
•
The Aluminum Frame has become loose and
needs to be tightened.
ACTION
Refer to Page 7 of this Manual: Assembly: Alluminum
Frame.
FOR TROUBLE SHOOTING
& SUPPORT GO TO
TANEASYPROTOOLS.COM
T R O U B L E S H O O T I N G
