2
1. Changing Settings
The switches on the front of the control unit can be used to change settings. While holding
down the RESET key, press the FUNCTION key. Then release only the RESET key to
display the menu shown in Fig.1. Select the necessary menu item by using the right/left keys
to move the cursor, and press the FUNCTION key to confirm the selection.
The screen in Fig. 2 is displayed when "Para set" is selected and the FUNCTION key
pressed to confirm the selection.
When the FUNCTION key is pressed after adjusting settings, the cursor automatically
moves to "End". Keep pressing the FUNCTION key to return to the original screen.
After returning to the main screen shown in Fig. 1, press the RESET key to return to the
Menu screen.
Be sure to record any changes to setting numeric values.
This record will be needed when the battery for the RAM goes flat (about 5 to 7 years).
Ver 1.0
Para set Temp cal
Time set
Para Prt
Fig.1 Menu Screen
Rate Range
Test. para
Output End
Fig.2 Parameter Settings Screen
